ProX XTP-GSLED4X300BLK LED Video Display Panel Ground Support System Package – 4M x 3M, Black

Product Description

The ProX XTP-GSLED4X300BLK is a complete LED video display panel ground support system package designed for a nominal 13.12 ft. (4M) wide x 9.84 ft. (3M) high LED video wall. Featuring four XT-GSWSB MK2 stabilizing T-bases, four black XT-F32LB984BLK F32 I-Beam linear truss segments, and 24 adjustable LED panel mounting plates, this freestanding support package provides the principal structural components for compatible ground-stacked LED display installations without relying on overhead suspension as the primary support method.

Designed for professional staging companies, AV integrators, rental houses, touring productions, corporate events, trade shows, broadcast studios, and houses of worship, the ProX XTP-GSLED4X300BLK combines a modular support structure with adjustable panel mounting hardware. Its matching black finish helps minimize the visibility of support components behind LED display panels, making it suitable for professional stages, exhibition displays, corporate presentations, and live entertainment productions.

Key Features of ProX XTP-GSLED4X300BLK

• ProX XTP-GSLED4X300BLK LED Video Display Panel Ground Support System Package
• Nominal 13.12 ft. (4M) wide x 9.84 ft. (3M) high LED video wall configuration
• Freestanding ground support design for compatible LED video walls
• Includes four XT-GSWSB MK2 Ground Support Stabilizing T-Bases
• Includes four XT-F32LB984BLK black F32 I-Beam linear truss segments
• 9.84 ft. (3M) linear truss segments with a listed 2 mm wall thickness
• Includes 24 XT-TC5LEDPABLK LED panel wall mounting plates
• Adjustable 10–13 inch telescoping offset clamps for compatible 2-inch pole truss
• Designed for compatible 500 x 500 mm and 500 x 1000 mm LED panels
• Ground support bases designed for compatible vertical truss arrangements and up to two vertical columns of 500 mm wide panels, subject to panel weight, ballast, and engineering approval
• Matching black finish across the listed package components
• Compact T-base design for efficient transportation, storage, and touring applications
• Modular components designed for professional staging and rental inventory
• Suitable for concerts, touring productions, trade shows, exhibitions, corporate presentations, broadcast environments, and houses of worship
• Adjustable-height alternative available as XTP-GSLED4X300BLK-SB2440, featuring four XT-GSWSB2440 stands with a stated 35–54 inch vertical adjustment range
• Ballast required but not included
• LED video display panels not included
• ProX Limited Warranty, subject to applicable terms

Technical Specifications

• Brand: ProX
• Model: XTP-GSLED4X300BLK
• Product Type: LED Video Display Panel Ground Support System Package
• Nominal System Width: 13.12 ft. / 4M
• Nominal System Height: 9.84 ft. / 3M
• System Configuration: Freestanding ground support
• Finish: Black
• Ground Support Base Model: XT-GSWSB MK2
• Ground Support Base Quantity: 4
• Ground Support Base Length: 3.28 ft. / 1M per base
• Linear Truss Model: XT-F32LB984BLK
• Linear Truss Quantity: 4
• Individual Truss Length: 9.84 ft. / 3M
• Truss Profile: F32 I-Beam linear truss
• Truss Wall Thickness: 2 mm, as listed
• Mounting Plate Model: XT-TC5LEDPABLK
• Mounting Plate Quantity: 24
• Mounting Plate Dimensions: 15.00 in. H x 5.00 in. W x 5.00 in. L per plate, as listed
• Individual Mounting Plate Weight: 2.50 lbs.
• Calculated Combined Mounting Plate Weight: 60 lbs. for 24 plates, based on the listed individual weight
• Mounting Clamp Adjustment Range: 10–13 inches
• Mounting Clamp Compatibility: Compatible 2-inch pole truss
• Compatible LED Panel Sizes: 500 x 500 mm and 500 x 1000 mm, subject to mounting compatibility
• LED Panels Included: No
• Ballast Included: No
• Ballast Requirements: Must be determined according to the approved installation design
• Suggested Shipping Method: LTL freight
• Warranty: ProX Limited Warranty, subject to applicable terms

Package Contents

• (4) XT-GSWSB MK2: Ground Support Stabilizing 1M / 3.28 ft. T-Bases for compatible LED screen wall ground stacking with F32 or compatible 12-inch bolt truss segments.
• (4) XT-F32LB984BLK: 9.84 ft. (3M) F32 I-Beam linear truss segments with a listed 2 mm wall thickness in black.
• (24) XT-TC5LEDPABLK: Black LED panel wall mounting plates with adjustable 10–13 inch extension clamps for compatible 2-inch pole truss.
• Not Included: LED display panels, ballast weights, and any additional equipment required by the approved installation design.

XT-GSWSB MK2 Ground Support Stabilizing T-Bases

The XT-GSWSB MK2 Ground Support Stabilizing T-Bases provide the floor-mounted foundation for the LED video wall support structure. This package includes four 1M (3.28 ft.) bases designed for compatible ground-stacked LED screen wall configurations. Their compact T-base profile helps reduce transportation and storage demands, making them suitable for touring productions, rental inventories, and professional event installations.

Each base supports a compatible vertical truss arrangement. The supplied product information identifies configurations accommodating up to two vertical columns of 500 mm wide LED panels per base, subject to panel weight, wall height, ballast, floor conditions, and approved structural design. ProX recommends appropriate rear ballast for each base to help prevent tipping. Confirm the permitted loading and base configuration with the manufacturer before installation.

XT-F32LB984BLK F32 I-Beam Linear Truss

The package includes four XT-F32LB984BLK F32 I-Beam linear truss segments, each measuring 9.84 ft. (3M) and featuring a listed 2 mm wall thickness. These black truss sections form the vertical structural components of the intended LED wall support configuration.

The 3M truss segments provide the nominal vertical structure for the 4M x 3M LED wall configuration. Their matching black finish helps keep the support hardware visually unobtrusive behind display panels, making the system suitable for concerts, stage backdrops, corporate presentations, exhibition displays, and broadcast environments. Use the specified connection components and follow the manufacturer's instructions when assembling the truss structure.

XT-TC5LEDPABLK Adjustable LED Panel Mounting Plates

The XT-TC5LEDPABLK LED panel wall mounting plates provide adjustable mounting points for compatible LED display installations. The package includes 24 black mounting plates featuring 10–13 inch telescoping offset clamps designed for compatible 2-inch pole truss.

The adjustable mounting range helps installers position compatible LED panels according to the planned layout and maintain consistent alignment across the display surface. The supplied product information identifies compatibility with standard 500 x 500 mm and 500 x 1000 mm LED panels. Each plate measures 15.00 inches high x 5.00 inches wide x 5.00 inches long and weighs 2.50 lbs., according to the supplied specifications. Verify the panel mounting interface, weight, dimensions, and approved attachment arrangement before use.

Freestanding 4M x 3M LED Video Wall Ground Support

The ProX XTP-GSLED4X300BLK is designed for compatible ground-supported LED display configurations in venues where overhead suspension is not the intended installation method. Its nominal 4M x 3M configuration provides a framework for planning a large-format LED video wall for concerts, touring productions, corporate presentations, trade shows, exhibitions, conferences, houses of worship, and professional AV events.

With four stabilizing bases, four vertical truss segments, and 24 adjustable mounting plates, this package brings together the principal support components for the intended display configuration. The completed structure must be assembled and evaluated as a complete system. Nominal dimensions and included component quantities do not establish the allowable load capacity. Verify manufacturer instructions, connection requirements, applicable load tables, panel weight, floor conditions, ballast, and structural stability before use.

Complete Ground Support Package for Professional AV

The ProX XTP-GSLED4X300BLK consolidates compatible ground support bases, vertical truss segments, and LED panel mounting hardware under one product model. This coordinated package can simplify equipment planning, purchasing, inventory management, and preparation for recurring event installations.

Its modular components support repeatable assembly workflows for qualified production crews working in concert venues, exhibition halls, corporate event spaces, and broadcast facilities. Actual setup time depends on the installation design, crew experience, display configuration, venue conditions, and required safety checks.

All-Black Finish for Professional Production

All listed structural components are supplied in a matching black finish. This understated appearance is well suited to professional stage environments, LED video backdrops, exhibition booths, broadcast sets, corporate events, and installations where support hardware should remain visually unobtrusive.

The coordinated finish provides a consistent appearance across the bases, truss segments, and mounting plates. The package is designed for production teams and rental businesses that need compatible support hardware for professional LED display deployments.

Ballast and Installation Safety

Ballast is required for safe operation and is not included with this package. The supplied product information states that ProX recommends ballast weight equal to the total installed LED panel weight as a baseline and recommends appropriate rear ballast at each base to help prevent tipping.

This baseline is not a substitute for an installation-specific engineering assessment. Actual ballast requirements depend on the complete installation, including panel weight and arrangement, wall height, base configuration, floor conditions, environmental exposure, and applicable engineering requirements. Sandbags and steel ballast weights may be used where appropriate to the approved design. A qualified structural professional must determine and approve the ballast, anchoring, and stability requirements for the specific installation.

Outdoor installations and environments exposed to wind require specific engineering review and approval. Do not use the system in high winds or severe weather unless the installation has been specifically evaluated and approved for those conditions. All installations must comply with manufacturer instructions, venue requirements, applicable local codes, and relevant engineering standards.

This product consists of ground-stack trussing and LED panel support hardware. It must be used according to accepted industry practices for LED video wall installations. ProX disclaims responsibility for improper use, incorrect ballast selection, and installations performed without appropriate professional evaluation.

Adjustable-Height Alternative: XTP-GSLED4X300BLK-SB2440

For productions that need additional vertical adjustment to accommodate different stage heights and sight lines, the ProX XTP-GSLED4X300BLK-SB2440 is identified as an alternative package featuring four XT-GSWSB2440 adjustable-height stands with a stated vertical adjustment range of 35–54 inches.

This alternative may be useful when adapting a compatible LED wall setup to different stage heights and sight lines. Confirm the alternative package's specifications, component contents, compatibility, and approved installation configuration before ordering.

Exterior Dimensions & Weight

• XT-TC5LEDPABLK Mounting Plates (24): 15.00 in. H x 5.00 in. W x 5.00 in. L per plate.
• Individual Mounting Plate Weight: 2.50 lbs.
• Calculated Combined Mounting Plate Weight: 60 lbs. for 24 plates, based on the listed individual weight.
• Ground Support Base Length: 1M / 3.28 ft. per XT-GSWSB MK2 base.
• Individual Linear Truss Length: 3M / 9.84 ft.
• Nominal System Dimensions: 13.12 ft. wide x 9.84 ft. high.
• Total Package Weight: Confirm with the manufacturer or supplier.

Shipping Dimensions & Weight

• XT-TC5LEDPABLK Mounting Plates: The supplied description lists 24 cartons measuring 16.00 in. H x 6.00 in. W x 6.00 in. L, at 3.00 lbs. per carton.
• XT-F32LB984BLK Linear Truss: Four cartons measuring 3.00 in. H x 12.00 in. W x 119.00 in. L, with a listed shipping weight of 20.00 lbs. per carton.
• XT-GSWSB MK2 Ground Support Bases: Four cartons measuring 44.00 in. H x 20.00 in. W x 4.00 in. L, with a listed shipping weight of 42.00 lbs. per carton.
• Suggested Shipping Method: LTL freight.

Shipping note: The supplied description identifies three carton groups, while the detailed packaging lists multiple cartons within each group. Confirm the final carton count, dimensions, and weights with the supplier before quoting freight or publishing final shipping totals.

Ideal Applications for the ProX XTP-GSLED4X300BLK

The ProX XTP-GSLED4X300BLK is designed for compatible ground-supported LED display installations across professional event, staging, and production environments.

• LED video walls and digital displays
• Concerts and touring productions
• Corporate events and business presentations
• Trade shows and exhibition booths
• Broadcast studios and production facilities
• Stage backdrops and live entertainment venues
• Professional AV integration projects
• Event rental and staging companies
• Houses of worship and large-format presentations
• Product launches and brand activations
• Conferences and convention venues
• Temporary ground-stacked LED video wall installations

Why Choose the ProX XTP-GSLED4X300BLK?

The ProX XTP-GSLED4X300BLK combines four stabilizing T-bases, four black F32 I-Beam linear truss segments, and 24 adjustable LED panel mounting plates in one coordinated package. Its nominal 4M x 3M configuration provides a practical starting point for compatible large-format LED video wall installations without relying on overhead suspension as the primary support method.

The matching black finish, modular support components, compact bases, and adjustable mounting hardware make this package suitable for professional AV integrators, staging companies, touring crews, and equipment rental businesses. Consolidating the principal support components into one package can simplify equipment planning and inventory management. As with any LED wall support structure, panel compatibility, loading, ballast, and installation safety must be evaluated for the complete system.

Buy ProX XTP-GSLED4X300BLK from USATRUSS

Shop the ProX XTP-GSLED4X300BLK 4M x 3M Black LED Video Display Panel Ground Support System Package from USATRUSS. This professional ground support package includes four XT-GSWSB MK2 T-bases, four black 9.84 ft. F32 I-Beam truss segments, and 24 adjustable LED panel mounting plates for compatible LED video wall installations.

Designed for concerts, touring productions, corporate presentations, trade shows, exhibitions, broadcast environments, and professional AV applications, this ProX package brings the principal ground support components together for equipment planning. LED panels and ballast are not included and must be provided according to the approved installation design.

Need help selecting LED video wall support equipment or confirming component compatibility? Contact USATRUSS or call 1-800-856-8397 for assistance with product specifications, availability, and ordering.

Frequently Asked Questions About ProX XTP-GSLED4X300BLK

What is the ProX XTP-GSLED4X300BLK?

The ProX XTP-GSLED4X300BLK is a black LED video display panel ground support system package designed for a nominal 13.12 ft. (4M) wide x 9.84 ft. (3M) high LED wall. It includes ground support bases, F32 I-Beam linear truss segments, and adjustable LED panel mounting plates.

What is included in the ProX XTP-GSLED4X300BLK package?

The package includes four XT-GSWSB MK2 stabilizing T-bases, four XT-F32LB984BLK 9.84 ft. (3M) black F32 I-Beam truss segments, and 24 XT-TC5LEDPABLK LED panel mounting plates. LED panels and ballast are not included.

What are the dimensions of the ProX XTP-GSLED4X300BLK?

The nominal support configuration measures 4M (13.12 ft.) wide x 3M (9.84 ft.) high. Each included linear truss segment measures 3M (9.84 ft.). Verify the final assembled configuration against the manufacturer's instructions.

Which LED panel sizes are compatible with this package?

The supplied product information identifies compatibility with standard 500 x 500 mm and 500 x 1000 mm LED panels. Verify the panel mounting interface, panel weight, dimensions, and approved configuration with the manufacturer before installation.

How many LED panel mounting plates are included?

The package includes 24 XT-TC5LEDPABLK LED panel wall mounting plates. Each plate features an adjustable 10–13 inch telescoping offset clamp designed for compatible 2-inch pole truss.

How many ground support bases and truss segments are included?

The package includes four XT-GSWSB MK2 stabilizing T-bases and four XT-F32LB984BLK F32 I-Beam linear truss segments. Each base measures 1M (3.28 ft.) in length, and each truss segment measures 3M (9.84 ft.).

Are LED panels included with this ground support system?

No. The package contains the listed ground support bases, truss segments, and mounting plates. LED display panels must be purchased separately.

Is ballast included with the ProX XTP-GSLED4X300BLK?

No. Ballast is not included and is required for safe operation. The supplied product information identifies ballast weight equal to the total installed LED panel weight as a baseline recommendation. A qualified structural professional must determine and approve the actual ballast and stability requirements for the installation.

Is an adjustable-height version available?

Yes. The supplied product information identifies the ProX XTP-GSLED4X300BLK-SB2440 as an adjustable-height alternative featuring four XT-GSWSB2440 stands with a stated vertical adjustment range of 35–54 inches. Confirm the package contents and compatibility before ordering.

Where can I buy the ProX XTP-GSLED4X300BLK?

You can shop the ProX XTP-GSLED4X300BLK LED Video Display Panel Ground Support System Package from USATRUSS. For assistance with product specifications, availability, or compatible components, Contact USATRUSS or call 1-800-856-8397.