ProX XTP-GSLED6X300BLK 6M x 3M Black LED Video Wall Ground Support System Package

Product Description

The ProX XTP-GSLED6X300BLK is a complete LED video display panel ground support system package designed for a nominal 19.68 ft. (6M) wide x 9.84 ft. (3M) high LED video wall. Featuring six XT-GSWSB MK2 stabilizing T-bases, six black F32 I-Beam linear truss segments, and 36 adjustable LED panel mounting plates, this freestanding support package provides the principal structural components for compatible ground-stacked LED display installations without relying on overhead suspension as the primary support method.

Designed for professional staging companies, AV integrators, rental houses, touring productions, corporate events, trade shows, and broadcast environments, the ProX XTP-GSLED6X300BLK combines a modular support structure with adjustable panel mounting hardware. Its matching black finish helps minimize the visibility of the support components behind LED display panels, making it suitable for professional stages, exhibition displays, corporate presentations, and live entertainment productions.

Key Features of ProX XTP-GSLED6X300BLK

• ProX XTP-GSLED6X300BLK LED Video Display Panel Ground Support System Package
• Nominal 19.68 ft. (6M) wide x 9.84 ft. (3M) high LED wall configuration
• Freestanding ground support design for compatible LED video walls
• Includes six XT-GSWSB MK2 Ground Support Stabilizing T-Bases
• Includes six XT-F32LB984BLK black F32 I-Beam linear truss segments
• 9.84 ft. (3M) linear truss segments with a listed 2 mm wall specification
• Includes 36 XT-TC5LEDPABLK LED panel wall mounting plates
• Adjustable 10–13 inch telescoping offset clamps for compatible 2-inch pole truss
• Designed for compatible 500 x 500 mm and 500 x 1000 mm LED panels
• Supports planned configurations with up to two vertical columns of 500 mm wide panels per base, subject to approved loading and installation requirements
• Matching black finish across the listed package components
• Modular components designed for professional staging and rental applications
• Suitable for concerts, touring productions, trade shows, exhibitions, and corporate presentations
• Adjustable-height package version available as XTP-GSLED6X300BLK-SB2440
• Ballast required but not included
• LED video display panels not included

Technical Specifications

• Brand: ProX
• Model: XTP-GSLED6X300BLK
• Product Type: LED Video Display Panel Ground Support System Package
• Nominal System Width: 19.68 ft. / 6M
• Nominal System Height: 9.84 ft. / 3M
• System Configuration: Freestanding ground support
• Finish: Black
• Ground Support Base Model: XT-GSWSB MK2
• Ground Support Base Quantity: 6
• Ground Support Base Length: 3.28 ft. / 1M per base, as specified
• Linear Truss Model: XT-F32LB984BLK
• Linear Truss Quantity: 6
• Individual Truss Length: 9.84 ft. / 3M
• Truss Profile: F32 I-Beam linear truss
• Truss Wall Specification: 2 mm, as listed
• Mounting Plate Model: XT-TC5LEDPABLK
• Mounting Plate Quantity: 36
• Mounting Clamp Adjustment Range: 10–13 inches
• Mounting Clamp Compatibility: Compatible 2-inch pole truss
• Compatible LED Panel Sizes: 500 x 500 mm and 500 x 1000 mm, subject to mounting compatibility
• LED Panels Included: No
• Ballast Included: No
• Ballast Requirements: Determine according to the approved installation design
• Suggested Shipping Method: LTL freight
• Warranty: ProX Limited Warranty, subject to applicable terms

Package Contents

• (6) XT-GSWSB MK2: Ground Support Stabilizing 1M / 3.28 ft. T-Bases for compatible LED screen wall ground stacking.
• (6) XT-F32LB984BLK: 9.84 ft. (3M) F32 I-Beam linear truss segments with a listed 2 mm wall specification in black.
• (36) XT-TC5LEDPABLK: Black LED panel wall mounting plates with adjustable 10–13 inch extension clamps for compatible 2-inch pole truss.
• Not Included: LED display panels, ballast weights, and any additional equipment required by the approved installation design.

XT-GSWSB MK2 Ground Support Stabilizing T-Bases

The XT-GSWSB MK2 Ground Support Stabilizing T-Bases provide the floor-mounted foundation for the support structure. The package includes six 1M (3.28 ft.) bases designed for compatible ground-stacked LED screen wall configurations. Their compact T-base design helps production teams manage transportation and storage while planning professional event installations.

Each base is intended to support a compatible vertical truss arrangement. The suitability of the completed configuration depends on the LED panel weight, wall height, ballast, floor conditions, and approved structural design. Confirm the permitted loading and base configuration with the manufacturer before installation.

XT-F32LB984BLK F32 I-Beam Linear Truss

The package includes six XT-F32LB984BLK F32 I-Beam linear truss segments, each measuring 9.84 ft. (3M) and featuring a listed 2 mm wall specification. These black truss sections form the vertical structural components of the intended LED wall support configuration.

The black finish provides a consistent appearance for stage backdrops, live entertainment productions, corporate presentations, exhibition displays, and broadcast environments. Use the specified connection components and follow the manufacturer's instructions when assembling the truss structure.

XT-TC5LEDPABLK Adjustable LED Panel Mounting Plates

The XT-TC5LEDPABLK LED panel wall mounting plates provide adjustable mounting points for compatible LED display installations. The package includes 36 black mounting plates featuring 10–13 inch telescoping offset clamps designed for compatible 2-inch pole truss.

The adjustable mounting range helps installers position compatible LED panels according to the planned layout. The manufacturer-supplied specifications identify compatibility with standard 500 x 500 mm and 500 x 1000 mm LED panels. Confirm the panel mounting interface, weight, dimensions, and approved attachment arrangement before use.

Freestanding LED Video Wall Ground Support

The ProX XTP-GSLED6X300BLK is designed for ground-supported LED display configurations in venues where overhead suspension is not the intended installation method. Its nominal 6M x 3M footprint offers a framework for planning a large-format LED video wall for concerts, touring productions, corporate presentations, trade shows, and professional AV events.

The complete structure must be assembled and evaluated as a system. Do not assume that the nominal dimensions or included component quantities establish the allowable load capacity. Verify the manufacturer's instructions, connection requirements, applicable load tables, panel weight, floor conditions, ballast, and structural stability before use.

Black Finish for Professional Production

All listed structural components are supplied in a matching black finish. This understated appearance is well suited to professional stage environments, LED video backdrops, exhibition booths, broadcast sets, corporate events, and other installations where the support structure should remain visually unobtrusive.

The coordinated package helps rental houses and production teams organize compatible truss, bases, and mounting hardware for transportation, storage, and repeated event deployment.

Ballast and Installation Safety

Ballast is required for safe operation and is not included with this package. According to the supplied product information, ProX recommends ballast weight equal to the total installed LED panel weight as a baseline. The final ballast requirements must be determined for the actual installation and approved by a qualified structural professional.

Sandbags and steel ballast weights may be used where appropriate for the installation. Outdoor use and environments exposed to wind require specific engineering review and approval. All installations must comply with manufacturer instructions, venue requirements, applicable local codes, and relevant engineering standards.

This product is ground-support trussing and mounting hardware. It must be used according to accepted industry practices for LED video wall installations. ProX disclaims responsibility for improper use, incorrect ballast selection, or installations performed without appropriate professional evaluation.

Adjustable-Height Alternative: XTP-GSLED6X300BLK-SB2440

For productions that need additional vertical adjustment, the ProX XTP-GSLED6X300BLK-SB2440 is identified as an alternative package featuring XT-GSWSB2440 stands with a stated vertical adjustment range of 35–54 inches.

This alternative may be useful when adapting a compatible LED wall setup to different stage heights and sight lines. Confirm the alternative package's specifications, component contents, compatibility, and approved installation configuration before ordering.

Exterior Dimensions & Weight

• XT-TC5LEDPABLK Mounting Plates (36): 15.00 in. H x 5.00 in. W x 5.00 in. L per plate.
• Individual Mounting Plate Weight: 2.50 lbs.
• Calculated Combined Mounting Plate Weight: 90 lbs. for 36 plates, based on the listed individual weight of 2.50 lbs.
• Ground Support Base Length: 1M / 3.28 ft. per XT-GSWSB MK2 base, as specified.
• Nominal System Dimensions: 19.68 ft. wide x 9.84 ft. high.
• Total Package Weight: Confirm with the manufacturer or supplier.

Shipping Dimensions & Weight

• Box 1 of 2 – XT-F32LB984BLK: Listed dimensions of 3.00 in. H x 12.00 in. W x 119.00 in. L; listed shipping weight of 20.00 lbs. The supplied information describes six truss boxes.
• Box 2 of 2 – XT-GSWSB MK2: Listed dimensions of 44.00 in. H x 20.00 in. W x 4.00 in. L; listed shipping weight of 42.00 lbs. The supplied information describes six base boxes.
• Suggested Shipping Method: LTL freight.

Shipping note: Verify whether the listed dimensions and weights apply per carton or to a grouped shipment before publishing freight estimates. The supplied shipping information does not provide a separate carton specification for the 36 mounting plates.

Ideal Applications for the ProX XTP-GSLED6X300BLK

The ProX XTP-GSLED6X300BLK is designed for compatible ground-supported LED display installations across professional event and production environments.

• LED video walls and digital displays
• Concerts and touring productions
• Corporate events and business presentations
• Trade shows and exhibition booths
• Broadcast studios and production facilities
• Stage backdrops and live entertainment venues
• Professional AV integration projects
• Event rental and staging companies
• Product launches and brand activations
• Conferences and convention venues
• Temporary ground-stacked LED video wall installations

Why Choose the ProX XTP-GSLED6X300BLK?

The ProX XTP-GSLED6X300BLK combines six stabilizing T-bases, six black F32 I-Beam linear truss segments, and 36 adjustable LED panel mounting plates in one coordinated package. Its nominal 6M x 3M configuration provides a practical starting point for compatible large-format LED video wall installations.

The matching black finish, modular support components, and adjustable mounting hardware make this package suitable for professional AV integrators, staging companies, touring crews, and equipment rental businesses. As with any LED wall support structure, panel compatibility, loading, ballast, and installation safety must be evaluated for the complete system.

Buy ProX XTP-GSLED6X300BLK from USATRUSS

Shop the ProX XTP-GSLED6X300BLK 6M x 3M Black LED Video Display Panel Ground Support System Package from USATRUSS. This professional ground support package includes six XT-GSWSB MK2 T-bases, six black 9.84 ft. F32 I-Beam truss segments, and 36 adjustable LED panel mounting plates for compatible LED video wall installations.

Designed for concerts, touring productions, corporate presentations, trade shows, exhibitions, and professional AV applications, this ProX package brings the principal ground support components together for equipment planning. LED panels and ballast are not included and must be provided according to the approved installation design.

Need help selecting LED video wall support equipment or confirming component compatibility? Contact USATRUSS or call 1-800-856-8397 for assistance with product specifications, availability, and ordering.

Frequently Asked Questions About ProX XTP-GSLED6X300BLK

What is the ProX XTP-GSLED6X300BLK?

The ProX XTP-GSLED6X300BLK is a black LED video display panel ground support system package designed for a nominal 19.68 ft. (6M) wide x 9.84 ft. (3M) high LED wall. It includes ground support bases, F32 I-Beam linear truss segments, and adjustable LED panel mounting plates.

What is included in the ProX XTP-GSLED6X300BLK package?

The package includes six XT-GSWSB MK2 stabilizing T-bases, six XT-F32LB984BLK 9.84 ft. (3M) black F32 I-Beam truss segments, and 36 XT-TC5LEDPABLK LED panel mounting plates. LED panels and ballast are not included.

What are the dimensions of the ProX XTP-GSLED6X300BLK?

The nominal support configuration measures 6M (19.68 ft.) wide x 3M (9.84 ft.) high. Each included linear truss segment measures 3M (9.84 ft.). Verify the final assembled configuration against the manufacturer's instructions.

Which LED panel sizes are compatible with this package?

The supplied product information identifies compatibility with standard 500 x 500 mm and 500 x 1000 mm LED panels. Verify the panel mounting interface, panel weight, dimensions, and approved configuration with the manufacturer before installation.

How many LED panel mounting plates are included?

The package includes 36 XT-TC5LEDPABLK LED panel wall mounting plates. Each plate features an adjustable 10–13 inch telescoping offset clamp designed for compatible 2-inch pole truss.

Are LED panels included with this ground support system?

No. The package contains the listed ground support bases, truss segments, and mounting plates. LED display panels must be purchased separately.

Is ballast included with the ProX XTP-GSLED6X300BLK?

No. Ballast is not included and is required for safe operation. The supplied product information recommends ballast weight equal to the total installed LED panel weight as a baseline. A qualified structural professional must determine and approve the actual ballast requirements for the installation.

Where can I buy the ProX XTP-GSLED6X300BLK?

You can shop the ProX XTP-GSLED6X300BLK LED Video Display Panel Ground Support System Package from USATRUSS. For assistance with product specifications, availability, or compatible components, Contact USATRUSS or call 1-800-856-8397.