ProX XTP-GS3023 LED Video Wall Ground Support System 30'W x 23'H with Hoist

Product Description

The ProX XTP-GS3023 LED Screen Display Panel Video Fly Wall Truss Ground Support System 30W x 23H Ft with Hoist is a professional LED video wall support system designed for large-scale display installations measuring 30 feet wide x 23 feet high. This package combines heavy-duty aluminum XT trussing, modular ground support towers, and the GSBPACK3 lift system to provide a structural framework for compatible LED video wall installations. Built with EN-AWT6 6082 aluminum, the ProX XT-SQ Series Truss is engineered for strength, durability, and professional staging applications. LED video wall panels are not included.

Designed for live outdoor productions, concerts, nightclubs, event venues, touring productions, and permanent installations, the ProX XTP-GS3023 provides a modular trussing solution for professional staging and AV applications. Its F34 square truss uses a standard conical connector system designed to connect with compatible trussing from other manufacturers that uses the same dimensions and connector type.

The system includes seven XT-SQ984 9.84 ft square truss segments, two ground support tower lift systems, and a manual chain hoist set. Additional package components include ground support sleeve blocks, top truss sections, hinge joints, wheeled tower bases with leveling jacks, shorter square truss segments, and outrigger stabilizers. These components form a configurable support structure for professional LED display installations when assembled according to approved engineering specifications.

Key Features of ProX XTP-GS3023

• Professional LED video wall fly wall truss ground support system
• Nominal display configuration: 30 ft wide x 23 ft high
• Heavy-duty ProX XT-SQ Series F34 square aluminum trussing
• Constructed from EN-AWT6 6082 aluminum
• TUV-certified aluminum welding
• Includes two XTP-GSBPACK3 truss tower lift systems
• Includes seven XT-SQ984 9.84 ft (3.00 m) square truss segments
• Includes one XT-MCH1TX2-30FT manual chain hoist set with 30 ft chain
• Standard conical connector system for compatible truss connections
• 2-inch (50 mm) main truss tubes
• 2 mm main tube wall thickness
• Modular ground support tower configuration
• Includes ground support sleeve blocks, top sections, hinge joints, and tower bases
• Includes outrigger stabilizer sets for compatible tower bases
• Designed for professional staging, concerts, outdoor productions, nightclubs, and permanent installations
• LED video wall panels are not included
• Professional rigging and installation are required

Technical Specifications

• Brand: ProX
• Model: XTP-GS3023
• Product Type: LED Screen Display Panel Video Fly Wall Truss Ground Support System
• Nominal System Width: 30 ft
• Nominal System Height: 23 ft
• Truss Series: ProX XT-SQ Series
• Truss Profile: F34 Square Truss
• Material: EN-AWT6 6082 Aluminum
• Main Tube Diameter: 2 in / 50 mm
• Main Tube Wall Thickness: 0.08 in / 2 mm
• Brace Diameter: 0.75 in / 20 mm, as listed
• Truss Height: 11.42 in / 290 mm
• Truss Width: 11.42 in / 290 mm
• Listed Truss Weight: 21 lb per 3.28 ft / 9.5 kg per meter
• Connector Type: Standard conical connector
• Welding Certification: TUV-certified aluminum welding, as specified
• Lift System: XTP-GSBPACK3 (2 included)
• Manual Chain Hoist: XT-MCH1TX2-30FT (1 set listed)
• LED Panels Included: No

Package Contents

• (2) XTP-GSBPACK3: Truss tower lift systems.
• (7) XT-SQ984: 9.84 ft / 3.00 m F34 square truss segments with connecting hardware and 2 mm wall thickness.
• (1) XT-MCH1TX2-30FT: Set of two 1-ton manual chain stage hoists with 30 ft chains, as described in the product information.
• (2) XT-BLOCK-MK2: Four-way corner ground support sleeve blocks for F34 truss systems and hoist applications.
• (2) XT-TOPCM: Top truss sections for electric motors or manual chain hoists.
• (2) XT-HINGEX4: Packs of four conical tube ground support post hinge joints, male-to-male, compatible with specified F31, F32, and F34 truss systems.
• (2) XT-GSBMK3: Universal vertical tower truss ground support bases on wheels with leveling jacks for compatible F34, F44, and 12-inch bolt truss systems.
• (2) XT-SQ328: 3.28 ft / 1.00 m F34 square truss segments with 2 mm wall thickness.
• (4) XT-GSOUTS3X2: Ground support outrigger stabilizer sets for XT-GSB tower bases, with two stabilizers per set.
• Not Included: LED display panels and any additional ballast, guy-wire assemblies, or installation components required by the approved engineering design.

Heavy-Duty Aluminum F34 Square Truss Construction

The ProX XTP-GS3023 uses the ProX XT-SQ Series F34 square truss, manufactured from EN-AWT6 6082 aluminum. Its main tubes measure 2 inches (50 mm) in diameter, with a listed wall thickness of 2 mm. This construction is intended for professional staging and structural support applications where compatible truss components are required.

The standard conical connector system allows the truss segments to connect with other manufacturers' trussing when the dimensions and connector specifications are compatible. ProX also offers a range of compatible corners, base plates, connectors, and accessories for different structural configurations.

Ground Support Towers and Hoist System

This package combines modular ground support towers with a manual chain hoist set to support the intended LED video wall framework. The included XTP-GSBPACK3 lift systems work with the listed tower and truss components to create a configurable support structure.

The package also includes ground support sleeve blocks, top truss sections, hinge joints, wheeled tower bases with leveling jacks, and outrigger stabilizers. These components must be assembled and used according to the manufacturer's instructions and the approved structural design. Verify the exact hoist configuration, rated capacity, lifting arrangement, and compatibility of all components before installation.

Professional Rigging and Installation Safety

WARNING: Professional rigging and engineering verification are essential before use. Always determine the total installed load, including LED panels, cables, accessories, and any other equipment attached to the structure. Refer to the manufacturer's truss loading chart and applicable engineering drawings before configuring or loading the system.

Ballast and guy-wire assemblies must be installed according to the approved engineering drawings and applicable certification requirements. The required ballast, anchoring, guy-wire arrangement, and stabilizing measures depend on the actual installation, total load, structure configuration, floor conditions, and environmental exposure.

Outdoor installations require particular attention to wind loading and site conditions. A qualified professional rigger or structural engineer must verify the installation, loading limits, stability measures, and compliance with applicable regulations. Improper installation or overloading can result in serious injury, equipment damage, or structural failure.

Exterior Dimensions and Weight

• Nominal System Dimensions: 30 ft wide x 23 ft high.
• XT-SQ328 (2): 39.36 in H x 11.42 in W x 11.42 in L; listed weight: 19.00 lb each.
• XT-TOPCM (2): 11.50 in H x 9.50 in W x 24.00 in L; listed weight: 26.40 lb each.
• XT-BLOCK-MK2 (2): 18.50 in H x 22.50 in W x 22.50 in L; listed weight: 77.30 lb each.
• XT-SQ984 (7): 118.08 in H x 12.00 in W x 12.00 in L; listed weight: 42.00 lb each.
• Total System Weight: Confirm the complete assembled package weight with the manufacturer or supplier.

Shipping Dimensions and Weight

• Box Group 1 – XT-GSOUTS3X2 (4 boxes): 75 in H x 6 in W x 6 in L; listed shipping weight: 40 lb.
• Box Group 2 – XT-SQ328 (2 boxes): 41.50 in H x 12.50 in W x 12.50 in L; listed shipping weight: 21 lb.
• Box Group 3 – XT-GSBMK3 (2 boxes): 9 in H x 29 in W x 29 in L; listed shipping weight: 70 lb.
• Box Group 4 – XT-HINGEX4 (2 boxes): 5 in H x 5 in W x 5 in L; listed shipping weight: 10 lb.
• Box Group 5 – XT-TOPCM (2 boxes): 12 in H x 10 in W x 25 in L; listed shipping weight: 28 lb.
• Box Group 6 – XT-BLOCK-MK2 (2 boxes): 20 in H x 24 in W x 24 in L; listed shipping weight: 80 lb.
• Box Group 7 – XT-SQ984 (7 boxes): 14 in H x 14 in W x 120 in L; listed shipping weight: 46 lb.

Ideal Applications

• Large-format LED video walls and display installations
• Concerts and live outdoor productions
• Touring productions and live entertainment events
• Nightclubs and entertainment venues
• Corporate events and presentations
• Trade shows and exhibitions
• Stage backdrops and event production structures
• Professional AV and staging installations
• Permanent installations designed and approved for the application
• Event production and rental companies

Why Choose the ProX XTP-GS3023?

The ProX XTP-GS3023 combines F34 square aluminum trussing, modular ground support towers, and a manual chain hoist set in a package designed for a nominal 30 ft wide x 23 ft high LED display framework. Its listed components include seven 9.84 ft truss segments, two tower lift systems, ground support blocks, top sections, hinge joints, wheeled bases, stabilizers, and shorter truss segments.

Manufactured using EN-AWT6 6082 aluminum and featuring TUV-certified aluminum welding as specified by the manufacturer, this system is intended for professional staging and LED display applications. Its modular construction supports compatible configurations when the system is correctly engineered, assembled, and operated within approved loading limits.

Buy ProX XTP-GS3023 from USATRUSS

Shop the ProX XTP-GS3023 LED Screen Display Panel Video Fly Wall Truss Ground Support System 30W x 23H Ft with Hoist for professional staging and LED video wall support applications. The package includes the listed ProX XT-SQ Series F34 square truss components, ground support tower lift systems, manual chain hoist set, support blocks, top sections, hinge joints, wheeled tower bases, and outrigger stabilizers.

Frequently Asked Questions

What is the ProX XTP-GS3023?

The ProX XTP-GS3023 is an LED screen display panel video fly wall truss ground support system designed for a nominal 30 ft wide x 23 ft high LED display framework. It combines aluminum square trussing, ground support towers, and a manual chain hoist set.

What are the nominal dimensions of this system?

The stated nominal configuration is 30 feet wide x 23 feet high. The final installed dimensions and usable display area depend on the approved assembly and LED panel configuration.

What material is used in the truss?

The ProX XT-SQ Series truss is manufactured from EN-AWT6 6082 aluminum, with 2-inch (50 mm) main tubes and a listed main tube wall thickness of 2 mm.

What is included in the package?

The supplied package information lists two XTP-GSBPACK3 tower lift systems, seven XT-SQ984 truss segments, a manual chain hoist set, ground support sleeve blocks, top truss sections, hinge joints, wheeled tower bases, two shorter XT-SQ328 truss segments, and four outrigger stabilizer sets.

Are LED video wall panels included?

No. LED video wall panels are not included and must be purchased separately.

Does this system include a hoist?

Yes. The supplied description lists one XT-MCH1TX2-30FT set of two 1-ton manual chain stage hoists with 30 ft chains. Confirm the exact supplied configuration and rated capacity with the manufacturer or supplier before use.

Can this system be used outdoors?

The supplied description identifies live outdoor productions as an intended application. Outdoor use requires engineering review of wind loads, ballast, anchoring, guy wires, stability, and site conditions before installation and operation.