Product Description
Trade Show Exhibit Display Booth Sys017
Trade Show Exhibit Display Booth 10×10 F34-102
10′ x 10′ Trade Show Booth wit Circular Front
Truss Booth is modular and can be set up in 2 different configurations. The logic of a modular booth design is important; each year customers expect you to come out with something new or something different. Retaining the same old truss stand may lead your most enthusiastic followers (the early adopters) and your competitors to think that you are starting to fall behind. Consequently, booth design is very much about the signals we are sending out to your potential and existing customers.
Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request
The truss booth system can typically be set-up by two to three people who are familiar with the truss booth system and the only tools required would be a steel hammer, and M10 Hex Allen Wrench Key.
The truss booth can be expanded to a larger size by adding additional pieces from our F34 Square Aluminum Truss series. Our line of 50mm 1.96″ – Clamps were specifically developed for this truss system.
You Create 2 Different Booth Configurations
In-Line 10×10 Truss Trade Show Booth
Lightweight Square Truss assembles
in minutes with the use of a Steel Hammer
Specificaions:
- Trade Show Exhibit Display Booth 10×10 F34-102
- 9.97-foot Overall Truss Booth Width
- 9.97-foot Overall Truss Booth Length
- 9.97-foot Overall Truss Booth Height
- General Truss Information
- F34 Square Aluminum Truss
- 11 7/16″ 290mm Overall Truss Width
- 2″ 50mm Outer Diameter Tubing
- 3/4″ 20mm Diagonal Bracing
- 0.078″ 2mm Wall Thickness
- Approximate Weight – 425 Lbs.
- Connecting Hardware Included
- Aluminum Brush Finish