ProX XTF-T101D Top Loading Truss Lifting Tower – 220 lbs. Capacity, 12.47 Ft. Height

Product Description

Introducing the ProX XTF-T101D Top Loading Truss Lifting Tower by Fantek, a professional-grade manual lifting solution designed for mobile DJs, live bands, event production companies, rental houses, venues, and stage lighting professionals. Featuring a maximum lifting height of 12.47 feet and a rated maximum load capacity of 220 lbs., this compact tower provides ground-supported elevation for compatible truss, lighting, and speaker configurations where overhead rigging points are unavailable. Built from steel in Spain by Fantek, the ProX XTF-T101D features a three-section telescopic mast, a manual winch, a steel cable and pulley system, automatic locking pins, and a wide base with non-slip rubber feet. Its compact folded dimensions make it a practical option for production crews who need a portable lifting tower for professional event applications.

Top Loading Design for Truss and Lighting Applications

The ProX XTF-T101D features a top loading design that supports compatible equipment above the mast. This configuration is intended for vertical lifting applications involving suitable truss spans, lighting bars, and speakers. When a suitable overhead rigging point is unavailable, a properly configured ground support tower can provide an alternative for approved production setups. For mounting compatible truss, pair the tower with the ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter, subject to manufacturer compatibility requirements. Always verify the load capacity and mounting requirements of the complete system before use.

Three-Section Telescopic Steel Mast

The ProX XTF-T101D features a three-section telescopic mast made from extensible steel profiles. The tower adjusts from a minimum height of approximately 4.59 feet to a maximum height of 12.47 feet, providing flexible elevation for compatible event production equipment. Its steel construction is designed for professional applications where a rigid support structure and controlled lifting are important. Always operate the mast according to the manufacturer's instructions and keep the specified load limits in mind when configuring the tower.

Steel Cable and Pulley Lifting System

A high-strength steel cable and grooved pulley system facilitate the tower's telescopic lifting operation. The pulleys feature SELOIL bearings, according to the supplied product specifications, to support smooth cable movement as the mast sections extend and retract. This mechanical arrangement helps operators raise and lower compatible loads using the manual winch. Inspect the cable, pulleys, winch, and related components before each use, and discontinue operation if any component shows signs of wear or damage.

Automatic Locking Pins for Height Security

The ProX XTF-T101D incorporates an automatic locking system with self-locking steel pins designed to secure the telescopic mast at the appropriate height. These mechanical locking components are an important part of the tower's lifting system. Always confirm that the locking pins have engaged correctly and follow the manufacturer's procedures for raising, securing, and lowering the tower. Never rely on the winch alone to support an elevated load when the manufacturer's locking procedure requires the pins to be engaged.

Manual Winch Operation

The tower uses a manually operated winch rated at 771.62 lbs., as specified in the supplied product information. This allows the lifting mechanism to be operated by hand without requiring electrical power at the tower's location. The winch rating is distinct from the tower's maximum rated load capacity of 220 lbs.; it must not be interpreted as the tower's permitted working load. Operate the winch only as instructed by the manufacturer and ensure that the load, mounting hardware, mast, and complete support configuration remain within their respective ratings.

Wide Base with Non-Slip Rubber Feet

The ProX XTF-T101D features a wide leg base measuring approximately 5.25 x 5.25 feet when fully deployed. Non-slip rubber feet are fitted to the legs to help provide grip on an appropriate supporting surface. The wide stance is designed to support the tower's stability when correctly positioned and configured. Set up the tower on a suitable, level surface, fully deploy its legs, and follow all manufacturer instructions concerning stabilization, clearances, and operating conditions before raising any equipment.

Compact Folding Design for Transport and Storage

Designed for production crews that frequently move equipment between venues, the ProX XTF-T101D folds down to a compact configuration. Its listed folded height is approximately 4.59 feet, and its folded base measures approximately 0.75 x 0.92 feet. These dimensions help make the tower easier to transport and store alongside compatible truss sections, lighting equipment, and event production cases. The compact format is particularly useful for mobile entertainers, rental companies, and technicians who need to manage vehicle and storage space efficiently.

Certified Design and Made in Spain by Fantek

The ProX XTF-T101D is manufactured in Spain by Fantek. The supplied product information identifies CE, DGUV, BGV C1, and BGG 912 as applicable standards or certifications. These designations should be verified against the manufacturer's current documentation for the exact model and intended application. For production companies, venues, and equipment rental businesses, maintaining the relevant product documentation can help with equipment checks and site-specific safety requirements.

Compatible Truss Bracket and Accessories

The ProX XTF-T101D is specified for use with the ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter for Top Load Center Lifting Towers. This accessory is intended to support compatible top-loading truss configurations. The supplied information also references XTF-ATCOB and mobile support components for truss and towers from T-1; verify the exact accessory model and compatibility before ordering. Truss brackets, adapters, fasteners, and attached equipment must be appropriate for the tower and the complete load configuration.

Key Features

• 220 lbs. Maximum Load Capacity: Designed to lift compatible truss, lighting, and speaker equipment within the manufacturer's specified limits.
• 12.47 Ft. Maximum Height: Provides vertical elevation for compatible stage lighting and event production applications.
• 4.59 Ft. Minimum Height: Offers a compact minimum operating height according to the supplied specifications.
• Top Loading Design: Supports compatible equipment at the top of the mast for vertical lifting applications.
• Three-Section Telescopic Mast: Features extensible steel profiles for height adjustment.
• Steel Cable and Pulley System: Uses a high-strength cable and grooved pulleys with SELOIL bearings.
• Automatic Locking Pins: Provides a mechanical mast-locking system when correctly engaged.
• Manual Winch: Features a supplied winch rating of 771.62 lbs. and operates without electrical power.
• 55.12 lbs. Minimum Load: The supplied specifications identify a minimum load of 55.12 lbs.; follow the manufacturer's requirements for permitted loading.
• Wide Leg Base: Opens to approximately 5.25 x 5.25 feet.
• Non-Slip Rubber Feet: Help provide grip on a suitable supporting surface.
• Compact Folded Base: Measures approximately 0.75 x 0.92 feet when folded.
• Steel Construction: Designed for professional production and event applications.
• Made in Spain: Manufactured by Fantek.
• Standards and Certifications: CE, DGUV, BGV C1, and BGG 912, as identified in the supplied product information.
• Compatible Accessory: ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter, subject to fitment verification.
• ProX Limited Warranty: Refer to the applicable warranty terms for coverage and conditions.

Technical Specifications

• Brand: ProX
• Manufacturer: Fantek
• Model: XTF-T101D
• Product Type: Top Loading Truss Lifting Tower
• Maximum Height: 12.47 ft. (approximately 3.80 m)
• Minimum Height: 4.59 ft. (approximately 1.40 m)
• Maximum Rated Load Capacity: 220 lbs. (approximately 99.8 kg)
• Minimum Load: 55.12 lbs. (approximately 25 kg)
• Winch Rating: 771.62 lbs. (approximately 350 kg), as specified by the supplier
• Mast Construction: Steel
• Mast Sections: 3 telescopic sections
• Lifting Mechanism: Manual winch with steel cable and pulleys
• Pulley Bearings: SELOIL bearings, as specified
• Locking System: Automatic locking pins
• Base Dimensions When Open: Approximately 5.25 x 5.25 ft.
• Base Dimensions When Folded: Approximately 0.75 x 0.92 ft.
• Folded Height: Approximately 4.59 ft., according to the supplied specifications
• Feet: Non-slip rubber feet
• Compatible Truss Bracket: ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter
• Standards and Certifications: CE, DGUV, BGV C1, and BGG 912, subject to manufacturer documentation
• Country of Manufacture: Spain
• UPC: 804589615668

Exterior Dimensions & Weight

• Exterior Dimensions: 10.00"H x 13.00"W x 51.00"L
• Product Weight: 55.00 lbs.

Shipping Dimensions & Weight

• Shipping Package: Box 1 of 1
• Shipping Dimensions: 11.00"H x 14.00"W x 52.00"L
• Shipping Weight: 60.00 lbs.
• Suggested Shipping Method: Parcel

What's Included

• 1 x ProX XTF-T101D Top Loading Truss Lifting Tower

Applications

The ProX XTF-T101D is designed for compatible ground-supported lifting applications where lighting, speakers, or truss equipment needs to be elevated without an overhead rigging point. Potential applications include:

• Mobile DJs: Supporting compatible truss and lighting arrangements for parties, weddings, and entertainment events.
• Live Bands and Concerts: Elevating compatible lighting equipment for performances and temporary stage setups.
• Event Production Companies: Providing a compact lifting tower for approved production configurations.
• Equipment Rental Companies: Adding a portable top loading tower to a professional event equipment inventory.
• Houses of Worship: Supporting compatible lighting and production equipment where permitted by the installation requirements.
• Performance Venues: Providing ground-supported elevation for suitable lighting and truss applications.
• Production Technicians: Transporting and setting up a compact manual lifting tower across multiple event locations.

Buy the ProX XTF-T101D from USATRUSS

Shop the ProX XTF-T101D Top Loading Truss Lifting Tower by Fantek at USATRUSS for professional event production, stage lighting, and compatible truss equipment. With a maximum rated load capacity of 220 lbs., a lifting height of 12.47 feet, and a compact folding design, this tower is designed for production professionals who need a portable ground-supported lifting solution.

Whether you are outfitting a mobile DJ setup, preparing a live performance, or managing an event production equipment inventory, our team can help you review compatibility and product requirements. Have questions about the compatible truss bracket, shipping, or your order? Contact USATRUSS or call 1-800-856-8397 for assistance.

Frequently Asked Questions

What is the maximum height of the ProX XTF-T101D?

The ProX XTF-T101D has a listed maximum lifting height of 12.47 feet, approximately 3.80 meters. Its listed minimum height is 4.59 feet. Always follow the manufacturer's instructions when extending or lowering the tower.

How much weight can the ProX XTF-T101D support?

The tower has a maximum rated load capacity of 220 lbs. The supplied specifications also identify a minimum load of 55.12 lbs. Follow the manufacturer's loading requirements and verify the ratings of the tower, bracket, truss, and attached equipment before use.

What is the difference between the winch rating and the tower's load capacity?

The supplied winch rating is 771.62 lbs., while the tower's maximum rated load capacity is 220 lbs. These figures describe different specifications. The winch rating must not be treated as the permitted working load of the complete tower system.

Does the ProX XTF-T101D include a truss adapter?

The ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter is listed as a compatible accessory. Confirm with USATRUSS whether the adapter is included in the product package or must be purchased separately.

How many telescopic sections does the tower have?

The ProX XTF-T101D features a three-section telescopic steel mast. The sections extend to provide a maximum lifting height of 12.47 feet, according to the supplied specifications.

Is the ProX XTF-T101D suitable for mobile DJs and event production?

The tower is designed for compatible truss, lighting, and speaker applications used in mobile DJ setups, live performances, and event production. Confirm that the intended configuration meets the manufacturer's load, mounting, and operating requirements.

What are the shipping dimensions and weight?

The listed shipping package measures 11.00"H x 14.00"W x 52.00"L, with a shipping weight of 60 lbs. The suggested shipping method is parcel delivery, subject to the carrier and destination requirements.

Where can I buy the ProX XTF-T101D?

You can purchase the ProX XTF-T101D from USATRUSS. For questions about product compatibility, included accessories, shipping, or ordering, visit Contact USATRUSS or call 1-800-856-8397.